Bolts n' stuff:

Wastegate top: (6) M5 (8mm head) nuts

Exhaust flex pipe: (3) 12mm head M8X30 bolts w/(3) M8 (12 mm head) nuts

Cam pulley bolt: (1) M12X35 (19mm head fine thread????(1.5??)) + (1) 12.5X28X6 washer

lower timing belt cover: (2)M6X12(10mm head) + (2) M6X10X1 washers


Oil filter heat shield: (3) M6X12 bolt (10mm head)

Oil pan bolts: (24) M6X14 bolts (10mm head w/built in lock washer)

Exhaust Manifold to Wastegate nuts: (4) M8 self-locking nuts (13mm head)

Power Steering tensioner: (1) M8X75 (13mm head) + (1) M8X25X2 washer + (1) M8 nut (13mm head) + (1) M8X18X2 washer

Power Steering mount: (3) M8X40 (13mm head)

Water Pump: (2) M8X35 (13mm head) + (1) M8X15X0.8 washer + (1) M8.4X24X4 washer + (1) M8X40 (6mm allen head w/10mm gap)

Rear timing belt cover: (2) M6X30 bolts (10mm head fine thread?) +(2) M6X10X1 washers

Alternator mount: (1) M8X100(75mm gap, 13mm head) bolt + (1) 8X15X0.8 spring washer + (1)8.4X21X4 washer + (2) M8 nuts (8mm head) + (1) M8X40 bolt (fine thread? 13mm head)

Engine Speed + reference sensor: (2) M6X20 allen bolts (5mm head) + (2) M6X25 allen bolts (5mm head) + (4) 6.4X11X1.6 washers

Exhaust Manifold: (10) AM8 nuts (13mm head w/built in washer welded on top) + (10) 10X15X1 washers

Turbo oil line(s): (2) M8X20 allen head (6mm head) + (2) B8X15X0.8 spring washers + (4) M6X18 allen head bolts (5mm head) + (4) B6X10X1 washers

Throttle Mechanism: (1) M6X20 bolt (13mm head)

Oil Pump bolts: (1) BM8X70 bolt (45mm gap + 13mm head) + (1) M6X30 bolts (10mm head) + (2) M6X22 bolt (10mm head) + (2) B6X12X1 washer

Oil Pickup bracket (in oil sump): (2) M6X10 bolts (10mm head) + (2) B6X10X0.5 washers

Oil Pickup pipe (in oil sump): (2) M6X18 bolts (10mm head) + (2) B6X10X0.5 washers

ISV mounting bracket: (1) M8X15 (13mm head) + (1) M6X12 bolt (10mm head) + (1) M6X15 bolt (10mm head)

Motor Mount nuts + bolts: (6) allen head M10X30 bolts (8mm head) + (6) B10X21X1 washers + (2) M10 nuts (17mm head) + (2) 10.5X34X2 washers

Injector cooling shroud: (2) M5X12 phillips hd screws

Turbocharger to Exhaust pipe: (4) MM10 (17mm head w/threaded washer welded on top) self locking nuts

Exhaust manifold to wastegate: (4) BM8 (13mm head w/threaded welded washer on top??) self locking nuts

AC mounting bracket: (5) M10X42 (17mm head w/10mm gap)

Clutch bolts: (6) M8X16 allen head (6mm head)

Intake Manifold bolts: (8) M8X65z1 allen head (6mm allen head w/35mm gap) +(8)M8.5X15X1

Starter Motor bolts: (2) M12X100 (19mm head w/65mm gap) + (3) A13X24X2.5 + (1) M12 nut (19mm head, 5mm thick)

Metal lip bottom of block: (2) M8X25 (13mm head) + (2) M8X30 (13mm head) + (4) B8X15X0.8 washers

Cylinder head cover nuts: (12) M6 nuts (10mm head acorn???)

Transmission to Engine bolts: (4) M12X70 (19mm head w/40mm gap) + (1) M12X85 (19mm head w/55mm gap)+ (1) M10X40 (17mm head w/10mm gap) +(1) M10X60 (8mm allen head w/30mm gap)+ (4) A13X24X2.5 washers + (1)12.5X20X1 washer + (2) 8.5X15X1 washers

Idler pulley bolt: (1) M6X62 (fine thread? 10mm head w/40mm gap) + (1) B6X10X0.5 spring washer + (1) B6.1X8X2 washer

Control Pressure Regulator: (2) M6X45 allen head bolts (5mm head w/20mm gap) + (2) B6 spring washers

Flywheel bolts: (8) M10X19.5 (17mm head w/built in washer on bottom) bolts

Bump Stop: (2) M10X80 (17mm head w/50mm gap) + (1) M8X42 (13mm head w/15mm gap)

Exhaust Manifold to turbo nuts: (4) M10 nuts (15mm head w/built in lock washers on bottom)

Thermostat housing: (2) M6X25 (10mm head) + (2) B6 washers

Vaccum hose bracket attached to rear of block: (1) M12X70 (19mm head w/40mm gap)

Exhaust piece to wastegate: (3) M6 (10mm head w/built in lock washer) nut

Downpipe to wastegate: (3) M8X25 (13mm head) + (3) M8 nuts (13mm head) + (3) 8X15X1 washers

Wastegate heatshield: (3) M6 (10mm head) nuts

Intercooler temp sensor mount: (2) M6X15 (5mm allen head) + (2) B6 washers

"Coolant outlet": (2) M6X18 (10mm head)+ (2) B6X10X0.5 washers

Downpipe to Catylitic converter: (4) M8X45 (13mm head) + (4) M8 nuts (13mm head) + (4) 8.5X15X1 washers